Tel
8615253787209
How to put excavators on the roof?
Release time:2024-02-28 Click:133
Many construction projects are facing the problem of demolition and new construction. The use of excavators has greatly improved the speed of demolition. Then, how to put excavators on the roof?
When the machinery was dismantled, the excavator slowly began to dismantle the place on the roof where the load was relatively large. The dismantled waste landfill formed a plane, and then the excavator walked on the top to dismantle the rest. Use this method to recycle each layer of demolition, so safe and time saving.
1. In the case that the floor is not very high, the excavator can climb to the roof with the help of its own strength. First, the opportunity to dig from the first floor, dig the waste steel bars, waste cement blocks and other waste, the opportunity to pad them at the bottom, and then slowly rotate to the roof.
2. If the floor is higher, the most common way to put the excavator on the roof is to use a crane, with one or two large horsepower cranes, to move the excavator to the roof. Or use the rolling machine, its operation principle and method is similar to the crane, which can lift the excavator and transport it to the roof.
3. Climb from the artificial spiral staircase to the roof.
Excavators are generally dismantled from top to bottom. Before the operation, a thorough plan and demolition plan should be formulated to ensure the safe and smooth progress of the project.
Hot products
Tel:8615253787209
E-mail:dwmachine@sddwm.com